When wooden windows are difficult to open or close, often the culprit is the cords that are used to attach window weights to the lower portion of the window. These cords called sash cords can easily be repaired. Window sash cord repairs are simple enough for most homeowners to do themselves.
The window weights are attached to the window its self by means of a cord called a sash cord. The cord is fed over a pulley from the window to the weights. The weights are located behind the window frame in the wall.
The cords deteriorate over time and may eventually fray or break. The counterbalance of the weight is necessary for the window to operate properly. The broken cords make the window difficult to operate and make a prop necessary to keep the window in an open position.
Sash cord repairs are not difficult. Most windows will have an access hole in the side of the window frame, but you have to remove the lower portion of the window to access this hole.
This portion is held in place by a small wooden trim that is easily removed. Use a sharp utility knife to cut through any paint that may be holding the trim in place. A putty knife will allow you to remove the trim gently without breaking it. You will also need to remove any metal channel and cut any remaining sash cords. You should be able to remove the lower portion of the window from the assembly. Open the access ports. The weights should be found inside these ports. Bring them out to attach the new cords which have been lowered over the pulleys.
Open the access box and remove the weights. Thread the new cord over the pulleys using a nail as a weight. Attach the cords to the window weights and then to the window. Now reverse these steps to complete the repair.
About the Author:
Want to know how to get your windows working properly? sash cord repairs could be your solution. Learn how to repair sash cords right now and fix your window problems today!
No comments:
Post a Comment